Atmospheric & Immersed Environments Primers

Jotun Penguard HB

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

Selemix Aqua 8-450 2k Waterborne Epoxy Primer

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

PPG SigmaCover 456

A high build polyamide cured recoatable epoxy coating.

Sherwin Williams Macropoxy 400 - Formerly Leighs Epigrip C400V3

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

Jotun Jotamastic Smart Pack

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

PPG Amercoat 71 TC

A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.

Rustoleum 1080 High-Build Primer

Provides protection for bare or blasted metal and has maximum durability under severely corrosive conditions.

Jotun Penguard Primer

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

International Intergard 269

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Rustoleum-Mathys 9180 High Performance Metal Primer

A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.

Jotun Penguard HSP ZP

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Sika SikaCor EG1

A MIO paint that is for temperatures as low as 0°C. directly to new or weathered galvanised steel.

International Interzinc 42

A two component, metallic zinc primer for steel in aggressive environments.

PPG Sigmarine 40 *CLEARANCE*

An alkyd undercoating product suitable for use in all alkyd paint systems, designed to provide adhesion to anti-corrosive primers and old paint system...

PPG SigmaWeld 190 Silicate Prefabrication Primer

A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.

PPG Sigma AquaWeld 100

A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.

Hempel Hempalin Undercoat 42460

A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.

Hempel Hempadur AvantGuard 550

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

Hempel Hempadur 15590

A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

International Interplate 398

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

Nullifire PM018 Primer or Top Seal Epoxy Coating

A two component, heavy duty, high build modified epoxy coating for the protection of steel in corrosive environments.

Jotun Vinyguard Silvergrey 88

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

Hempel Uni-Primer 13140

Provides the possibility of reducing the number of primers for maintenance.

International Intershield 300HS

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

Hempel Hempadur Speed-Dry ZP 500

A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.

Hempel Hempaprime Multi 500 Winter

A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.

Jotun Penguard FC

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.