Hempel Hempalin Undercoat 42460 is suitable as a general purpose undercoating in alkyd paint systems on exterior and interior steelwork, wood, plaster, etc. in mildly to moderately corrosive environment.
Preparation depends on specification. Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying. Hempel Hempalin Primer is the recommended preceding coat with Hempel Hempalin Enamel as the subsequent coat.
|Stock Colours:||10000 White|
|VOC Content:||380 g/L|
|Suitable Substrates:||For exterior and interior steelwork, wood, plaster, etc. in mildly to moderately corrosive environment|
|Application Method:||Airless spray / Air spray / Brush|
|Theoretical Coverage:||13.3 m2 per litre|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||40 microns|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||See data sheet|
|Cleaner / Thinner:||Clean tools and thin with with HEMPEL'S THINNER 08230|
|Shelf Life:||See tin|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.