Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.
R2-class, rapid-setting shrinkage compensated thixotropic, fibre-reinforced, cementitious mortar applied in a single layer from 3 to 40mm thick, for r...
A ready to use, aqueous pretreatment or protective agent against algae and fungi infestation.
A highly filled exterior paint for base and intermediate coats within the Keim Concretal W system.
A mineral dry bagged pre-mixed restoration mortar with hydraulic binders designed as a joint restoration material.
A natural stone replacement material for lining deep areas of damage (> 2 cm) and a core material for open form casting.
A mineral dry bagged pre mixed restoration mortar with hydraulic binders used for professional stone repair.
Formulated for use in extreme climatic conditions as a primary coat and filler.
Versatile, fast repair mortar for repairing concrete in just a few hours.
900% elastic, use for sealing, jointing, filling, fixing and gluing window, door frames and roofing sheets
A highly elastic primer with good filling properties. Part of the Remmers Colorflex Render System for Park Homes.
For the protection of facades against the driving rain and subsequent treatment or renewal of hydrophobic surfaces.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.
Specially formulated as a ready to use silicate-based filler for use on interior and exterior mineral substrates.
Priming coat to equalize differences in texture and/or to fill small hairline cracks.
A highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.
A water borne alkyd based full-matt adhesion primer for wooden surfaces externally.
A sol-silicate-based, ready to use thin layer coating/mineral stain, for low pigmented coatings on natural stone.
An emulsion based, water dilutable scrim fixative and sealer for absorbent masonry surfaces.
An efficient additive for water based paint products to prevent mould, algae and fungicidal growth.
A single pack, solvent free strengthening concentrate for priming & horizontal waterproofing.