CX Environments

CX Environments are exterior offshore areas with high salinity, industrial areas with extreme humidity and tropical atmospheres. Internally, they are industrial areas with extreme humidity. In accordance with ISO 12944:2018 in accordance with Part 9. All offshore systems must continue to go through 4,200 hours of cycling testing, which equates to 25 weeks.

Scroll to the bottom of this page for a full list of suppliers and their specifications.


Download the manufacturer specifications for steel systems below:

Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teknos
Guide To Working In Confined Spaces

15 Items

Set Descending Direction
  1. Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer
    Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer

    A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

    From £227.36 £189.47
  2. Carboline Carbozinc 11
    Carboline Carbozinc 11

    Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

    From £257.04 £214.20
  3. International Interzinc 52E
    International Interzinc 52E

    A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

    From £347.63 £289.69
  4. Sherwin Williams Macropoxy 646 Epoxy Primer Finish
    Sherwin Williams Macropoxy 646 Epoxy Primer Finish

    A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...

    From £197.74 £164.78
  5. Sherwin Williams Zinc Clad IV EU Formerly M501
    Sherwin Williams Zinc Clad IV EU Formerly M501

    An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

    From £665.50 £554.58
  6. PPG SigmaZinc 68 GP
    PPG SigmaZinc 68 GP

    A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

    From £267.84 £223.20
  7. Hempel Hempathane HS 55610
    Hempel Hempathane HS 55610

    A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

    From £76.32 £63.60
  8. Sherwin Williams Acrolon 7300 Acrylic Finish
    Sherwin Williams Acrolon 7300 Acrylic Finish

    A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

    From £123.55 £102.96
  9. Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish
    Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish

    A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

    From £173.16 £144.30
  10. Hempel Hempadur Quattro XO 17870
    Hempel Hempadur Quattro XO 17870

    A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

    From £249.54 £207.95
  11. Hempel Hempaxane Light 55030
    Hempel Hempaxane Light 55030

    A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

    From £265.33 £221.11
  12. Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3
    Sherwin Williams Macropoxy 267 - Formerly Leighs Epigrip C267V3

    A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

    From £108.73 £90.61
  13. Hempel Pro Acrylic 55883 QD
    Hempel Pro Acrylic 55883 QD

    Suitable for use as a finishing coat for protection of structural steel.

    From £105.22 £87.68
per page