Hempel Hempaxane Light 55030

SKU
id10175
UN1263 (Class: 3, Pk Grp: III)
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
Quantities and Price On Application
£261.42 £217.85
Out of stock
Product Description

Please note, this product is made to order.  Please call 01462 421333.

Hempel Hempaxane Light 55030 is a two-component enamel finishing coat for professional application to structures in severely corrosive environments.

This product is part of the Network Rail specification NR/L3/CIV/039

Hempaxane Light 55030 is a two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention.

Best Uses

Hempaxane Light 55030 is an isocyanate free coating system. It provides a protective and decorative finishing coat for substrates which are found in severely corrosive atmospheric environments.

Application

Surfaces should be clean, dry and with a temperature which is above due point, to avoid condensation. Hempaxane Light 55030 can be applied with an Airless Spray or Brush. Please read the Technical Data Sheets for full preparation and application methods.

Surface and Environment

Hempaxane Light 55030 is suitable for use on structures in environments which have severely corrosive atmospheric conditions.

Technical Details

Approvals

  • This product is part of the Network Rail specification NR/L3/CIV/039
  • Certificate number M20/186, M20/187, M20/188, M21/035, M24/069, N1/110, N9/037, N2/036 and N4/105
  • Norsok M-501 system no. 1 (Pre-Qualified)

Technical Info

Components: Two Part
Type: Polysiloxane Enamel
Finish: Gloss
Stock Colours: 17380 Grey
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 209.0g per Litre
Volume Solids: 82%
Suitable Substrates: For metal surfaces
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 10.9 m2 per litre at 75 microns
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 75 microns
Induction Time: -
Pot Life: 4 hours at 20°C
Touch Dry: 2.5 hours at 20°C
Overcoatable: According to specification
Fully Cured: 7 days at 20°C
Cleaner / Thinner:  
Shelf Life:  
Packaging: Price and size on application

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use