Misc Specialist Primers

A 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium and other metal types where adhesion is problematic.

A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115

A two pack blast primer for Sherwin Williams Firetex intumescent coatings.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.

A rapid dry primer for steel and galvanised surfaces containing anti-corrosive pigment and improves surface adhesion.

A synthetic primer non-toxic primer which will provide protection for a wide range substrates and in particular ferrous steel.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

A high performance single coat industrial maintenance coating.

A two component epoxy holding primer.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A glass flake vinylester primer suitable for application to steel or concrete.

A grey, two component, moisture curing, low zinc silicate prefabrication primer suitable for automatic application on shot blasted steel plates.

A water based, quick drying gloss acrylic finish or sealercoat for Sherwin Williams FX Firetex intumescent product range.

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...

Transgard TG116 two pack epoxy undercoat for abraded surfaces. Highways Item 116.

Formerly Amercoat 139. A two component polyamide cured epoxy prefabrication primer.

A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.

A water based steel galvanised steel aluminium brass copper railing garage doors non ferrous metals.