£9.95 delivery on orders excluding certain products & postcodes *
Sherwin Williams Transgard TG116 is best suited for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes. Recommended curing temperature above 10°C. Extended drying times will be observed at lower temperatures.
Sherwin Williams Macropoxy M905 is recommended alternative for low temperature application and curing.
Recommended application via brush or airless spray. Recommended Sherwin Williams C5 for thinning and Sherwin Williams C9 or Sherwin Williams C13 for cleaning. Recommended primer Sherwin Williams Transgard TG115. For overcoating with epoxy products (including self overcoating), the maximum recommended interval is 28 days at 23°C. For overcoating outside this interval, consult our technical team technical support for advice.
Where a high degree of gloss and colour retention is required overcoat with Transgard TG168 or TG169 within 7 days at a minimum DFT of 50 microns. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. Ensure surfaces to be coated are clean, dry and free from all surface contamination.
Components: | Two Pack |
Type: | Epoxy Undercoat |
Finish: | - |
Stock Colours: | Dark Grey, Light Grey |
Tintable: | Limited Range. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 240 gms/litre |
Volume Solids: | 75 ± 3% |
Suitable Substrates: | Abraded Surfaces |
Application Method: | Brush, Airless Spray |
Theoretical Coverage: | 7.5 m2/ltr |
Wet Film Thickness (WFT): | 133 microns |
Dry Film Thickness (DFT): | 100 microns |
Induction Time: | - |
Pot Life: | 2 hours at 23°C |
Touch Dry: | 3 hours at 23°C |
Overcoatable: | 8 hours at 23°C |
To Handle: | 16 hours at 23°C |
Cleaner / Thinner: | No.5 for thinning, No.9 or No.13 for cleaning |
Shelf Life: | 2 years from date of production unopened or 'use by' date where specified |
Packaging: | Available in 5 Litres |