£7.75 delivery on orders excluding certain products & postcodes *
This product is now discontinued. See Sherwin Williams Macropoxy 400 as a potential alternative.
An M24 spec low temperature curing, surface and humidity tolerant two pack modified epoxy anti corrosive coating for long life steel protection.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required.
Suitable for use in a range of markets where durable performance and aesthetics are needed.
A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.
A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....
A single component anti-corrosive spraying or brushing primer for steel.
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
A conventional quick drying undercoat / tiecoat developed for marine use on above waterline areas.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency Item No.123
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A two pack epoxy, zinc free prefabrication primer formulated as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning....
Transgard TG121/Epigrip K267 two pack epoxy high solids Micaceous Iron Oxide (MIO) Highway Agency Item No.121. N9/038 Protective system reference
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
A quick drying, 2 pack epoxy zinc phosphate blast primer, designed for the anti corrosive protection of carbon steel surfaces.
A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
A 2-pack epoxy sealercoat for use over zinc rich primers or as a blast primer over stainless steel.
A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.