Sherwin Williams Fast Clad 7220

SKU
id21870
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.
Available in 20 Litres
From £292.88 £244.07
In stock
Only %1 left
Product Description

Sherwin Williams Fast Clad 7220 is a multi-functional low temperature curing phenalkylated zinc phosphate primer coating for the protection of carbon steel.

Best Uses

Sherwin Williams Fast Clad 7220 is specified for use as a primer for structural steel on blast cleaned steel for internal and external environments. It may also be used as a high build intermediate coat as well as the final coat where a low sheen industrial and functional finish is required. Not for immersion service.

Where good colour and gloss retention is required in an external environment or if a full decorative finish is required in an internal environment one of Sherwin Williams topcoats designed specifically for this role should be chosen such as Acrolon 7300, Acrolon C137V2, Acrolon C237 or Acrolon 1850 finishes.

Sherwin Williams Fast-Clad 7220 may be applied between 75 and 225 microns DFT in one coat depending on specification requirement. As many projects will differ in terms of client requirements and exposure environments, detailed project specifications are available from Promain separately.

Technical Details

Approvals

  • ISO 12944:2018 Approved for C2
  • ISO 12944:2018 Approved for C3
  • ISO 12944:2018 Approved for C4
  • ISO 12944:2018 Approved for C5 corrosivity categories up to Very High durability (>25 years)

Technical Info

Components: Two Component
Type: Phenalkylated zinc phosphate
Finish:  
Stock Colours: Light Grey, Dark Grey, Red Oxide, Black, White
Tintable: No
VOC Content: 255 g/L
Volume Solids: 68%
Suitable Substrates: For internal and external structural steel
Application Method: Brush, Roller, Conventional Spray or Airless Spray
Theoretical Coverage: 9.07 m2 per litre
Wet Film Thickness (WFT): 110 microns
Dry Film Thickness (DFT): 75 microns
Induction Time: -
Pot Life: 1 hour at 23°C
Touch Dry: 15 minutes at 23°C
Overcoatable: After 1 hour at 23°C
Dry to Handle: 2 hours at 23°C
Cleaner / Thinner: Use Sherwin Williams Thinner No 2 for thinning. Use Sherwin Williams No 9 or No 13 for cleaning
Shelf Life:

Base: 2 years from date of manufacture or ‘Use By’ date where specified.

Hardener: 1 year from date of manufacture or ‘Use By’ date where specified.

Packaging: Available in 20 Litres
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use