Sherwin Williams Cleanser Thinner C2 is best used as per data sheets for the relevant products. If you need further info in regards your requirements contact our technical team.
Sherwin Williams Cleanser Thinner C2 can be applied via brush, roller or spray depending on the associated product.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A single pack, solvent based, thin film 120 minute intumescent coating for on site application onto structural steel.
A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
A single pack thin film intumescent coating to provide 120 minute of fire resistance to structural steel.
A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external st...
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A high solids 2 pack epoxy, pigmented with glass flakes and anti corrosives for use on steel. Network Rail Item 7.2.3. Highways Agency ...