£7.75 delivery on orders excluding certain products & postcodes *
A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.
A self-priming pure epoxy paint which cures to a corrosion resistant coating.
A two pack epoxy primer/finish offering corrosion protection in one coat.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A two component primer which is ideal for speeding up production and throughput.
An epoxy primer which provides optimised control where thin film application is required.
A fast curing epoxy primer for use with International 3200 product series.
A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.
A 2K high build epoxy primer containing anticorrosive pigments.
A self-priming, two-component, high build epoxy paint containing zinc phosphate.
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.
A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.
A two pack epoxy, mid-sheen primer/finish for blast cleaned steelwork. Low temperature curing and high build airless spray capability.
Formulated for application to exposed metal substrates prior to the application of Sika Liquid Plastics Roofing and Balcony Waterproofing System.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.