International Intercure 99

SKU
id18705
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: Non Hazardous
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
Available in 20 Litres
From £616.16 £513.47
In stock
Product Description

International Intercure 99 is a low VOC, high solids, rapid cure primer / finish, offering excellent anti-corrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.

Best Uses

Intercure 99 is intended for use as a single coat high performance finish for structural steel applications, a reduced number of coats aids in yard throughput and productivity. Rapid cure and early handling properties make it ideal for applications such as wind towers, transformers, mining equipment and pumps where productivity and drying space are of prime importance.

International Intercure 99 polyaspartic technology is applied as a single coat at 150-250 microns (6-10 mils) direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2). Intercure 99 may also be specified as a high build, durable intermediate/finish over approved anti-corrosive primers for more aggressive environments, i.e. ISO 12944 C4 and C5M.

Approved for use on Network Rail New Works Systems and for Maintenance.

Application

All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.

Abrasive Blast
Abrasive blast clean to Sa2½ (ISO 8501-1:2007) or SSPC-SP6. If oxidation has occurred between blasting and application of Intercure 99, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner.
A surface profile of 50-75 microns (2-3 mils) is recommended.

Primed Surfaces
Intercure 99 may be applied over approved anti-corrosive primers in some circumstances; please consult our technical team for further advice.

Technical Details

Approvals

  • Network Rail New Systems Approved - N4 Protective Treatment. Certificate Ref XN90/N4-108
  • Network Rail Maintenance Systems Approved - M20 Protective Treatment. Certificate Ref XM92/M20-199

Technical Info

Components: Two Part
Type: Polyaspartic
Finish: Gloss
Stock Colours: White
Tintable: Yes, to a wide range of colours on the Chromascan system. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 165.0g per Litre
Volume Solids: 80%
Suitable Substrates: For structural steel
Application Method: Airless Spray, Air Spray
Theoretical Coverage: 4.57 m2 per litre at 175 microns
Wet Film Thickness (WFT): 188 - 313 microns
Dry Film Thickness (DFT): 150 - 250 microns
Induction Time: -
Pot Life: 1.5 hours at 15°C
Touch Dry: 1 hours at 15°C
Overcoatable: Between 3 and 24 hours at 20°C
Hard Dry: 3 hours at 15°C
Cleaner / Thinner: Clean up with International GTA713 (or International GTA056)
Shelf Life: 12 months minimum at 25°C (77°F). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of
heat and ignition.
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use