£7.75 delivery on orders excluding certain products & postcodes *
A protective system for existing structures using epoxy – polyurethane topcoat.
Download the manufacturer specifications for Network Rail certified systems below:
Hempel | International Paints | Jotun | PPG | Sherwin Williams
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
For use on a wide variety of substrates including hand prepared rusty steel.
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A high performance, fast drying, acrylic urethane exterior gloss with good colour retention. N9, M24, M34 and Item No.168. approved.
A winterfast hi build undercoat formulated for low temperature curing down to 0°C.
A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.
A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...
A quick drying, 2 pack epoxy zinc phosphate blast primer, designed for the anti corrosive protection of carbon steel surfaces.
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109