Hempel Hempadur 15570

SKU
id10160
Part A and B: UN1263 (Class: 3, Pk Grp: III)
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
Available in 5 and 20 Litres
From £44.02 £36.68
In stock
Only %1 left
Product Description

Hempel Hempadur 15570 provides a corrosion resistant coating to steel and metal surfaces.

This product is part of the Network Rail specification NR/L3/CIV/039

Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C. The MIO pigmented light grey shade is suitable for application under humid conditions or on damp or moist surfaces. The greyish yellow shade contains zinc phosphate.

Best Uses

Hempadur 15570 is a maintenance and repair primer, intermediate and/or finishing coating (where cosmetic appearance is of less importance) in the Hempadur systems, for severely corrosive environment. Hempadur 15570 MIO can also be used as a low temperature curing product.

Application

Hempadur 15570 should be applied with an air or airless spray or brush. Attention is drawn to the pot life of 2 hours and a mixing ratio of 3:1. The maximum dry exposure temperature is 140°C. Please read the technical data sheet for full preparation and application methods.

Surface and Environment

Hempadur 15570 is suitable for metals including steel and stainless steel. It can be applied in humid conditions and on damp steel surfaces, in temperatures down to minus 10°C.

Technical Details

Approvals

  • This product is part of the Network Rail specification NR/L3/CIV/039
  • Certificate number M20/183 and M20/186
  • Complies with European Fire Standard EN 13501-1; Classification B-s1, d0
  • NATO Approval No. 8010-99-943-1152 (12430 Light Grey 5 Litres)
  • Norsok M-501 system no. 2A
  • Norsok M-501 system no. 5A (Pre-Qualified)
  • Norsok M-501 system no. 5B (Pre-Qualified)
  • Norsok M-501 system no. 6A
  • Norsok M-501 system no. 8A

Technical Info

Components: Two Part
Type: Polyamid Adduct Cured Epoxy
Finish: Flat
Stock Colours: 12430 Reddish Grey, 50630 Red
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 415.0g per Litre
Volume Solids: 54%
Suitable Substrates: For metal surfaces
Application Method: Brush, Air Atomised Spray or Airless Spray
Theoretical Coverage: 5.4 m2 per litre at 100 microns
Wet Film Thickness (WFT): 200 microns
Dry Film Thickness (DFT): 100 microns
Induction Time: -
Pot Life: 2 hours at 20°C
Touch Dry: 1 hours at 20°C
Overcoatable: See data sheet
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Clean tools with HEMPEL'S TOOL CLEANER 99610. Thin with Hempel 08450 as per data sheet.
Shelf Life: 3 years for BASE and 3 years (25°C/77°F) for CURING AGENT from time of production
Packaging: Available in 5 and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use