Hempel Hempathane HS 55610

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved No.169.

Available in 5 and 20 Litres. Tintable upon request.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£63.60

Inc VAT £76.32

PRODUCT DETAILS

Hempel Hempathane HS 55610 is a two component, polyurethane, acrylic topcoat, cured with aliphatic isocyanate, containing zinc phosphate, with good gloss and colour retention.

BBA Cert No. 08/H135-PS13 Highways Agency Approved Item No.169. This product is part of the Network Rail Specification NR/L3/CIV/039

Best Uses

Hempel Hempathane HS 55610 is best used for providing a decorative top-coat in a range of deep, pale and strong shades, to structural steel in anti-corrosive environments.

Application

Hempel Hempathane HS 55610 can be applied using spray application for a theoretical coverage rate of 6.7m2 per litre per coat and works best when 2 coats are applied to the substrate.

Surface and Environment

Hempel Hempathane HS 55610 can be used in all environments exposed to high levels of corrosion and is ideally suited for marine, industrial and construction areas, for use on structural steel.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

TECHNICAL

Approvals and Certifications

This product is part of the Network Rail Specification NR/L3/CIV/039 Certificate number M20/181, M20/183, M20/184, M21/034, M24/069, N1/109, N2/034, N4/104 and N9/036
Highways Agency Approved. Item number 169
BBA Cert No. 08/H135-PS13
NORSOK M-501 system no. 1 (Pre-Qualified)
NORSOK M-501 system no. 2B
NORSOK M-501 system no. 6A
NORSOK M-501 system no. 6B
NORSOK M-501 system no. 7A (Pre-Qualified)

Technical Info

Components:	Two Part
Type:	Acrylic Polyurethane
Finish:	Gloss
Stock Colours:	Just tints
Tintable:	Yes. Please note, bespoke tints are non-refundable / exchangeable
VOC Content:	337.0g per Litre
Volume Solids:	67%
Suitable Substrates:	For steel
Application Method:	Brush or Airless Spray
Theoretical Coverage:	6.7 m2 per litre
Wet Film Thickness (WFT):	See data sheet
Dry Film Thickness (DFT):	See data sheet
Induction Time:	-
Pot Life:	2 hours at 20°C
Touch Dry:	3 hours at 20°C
Overcoatable:	See data sheet
Fully Cured:	7 days at 20°C
Cleaner / Thinner:	HEMPEL'S THINNER 08080
Shelf Life:	3 years for BASE and 2 years (25°C/77°F) for CURING AGENT from time of production
Packaging:	Available in 5 and 20 Litres