Hempel T-Wash 09940

SKU
id4331
UN1263 (Class: 3, Pk Grp: II)
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
Available in 5 Litres
£28.85 £24.04
In stock
Product Description

Hempel's T-Wash 09940 is a high quality pre-treatment etch solution for new galvanised steel.

Hempel's T-Wash 09940 is a phosphoric, acid based, mordant etch solution designed for use on galvanised steel and developed based on a formulation by British Rail.

Best Uses

Hempel's T-Wash 09940 has been specially formulated to provide a high quality etching pre-treatment for galvanised steel and is ideally used in the marine, Highways or rail industry.

Application

Hempel's T-Wash 09940 is a pale blue solution that can be applied using a brush or sponge and provides a low cost product which produces a high performance etching.

Surface and Environment

Hempel's T-Wash 09940 has been purposely developed by Hempel for use on new galvanised steel and can be used in all industrial and marine type exposures, where structural steel exists.

Technical Details

Approvals

  • Highways Agency Approved Item number. 155
  • BBA Cert. no. 08/H135-PS10

Technical Info

Components: Single Pack
Type: Etch Solution
Finish: -
Stock Colours: Dark green 04300
Tintable: No
VOC Content: 325 g/L
Volume Solids: 4 ± 2%
Suitable Substrates: As pre-treatment for new galvanised steel
Application Method: Brush
Theoretical Coverage: 44 m²/L
Wet Film Thickness (WFT): 25 micron
Dry Film Thickness (DFT): 1 micron
Induction Time: -
Pot Life: -
Touch Dry: 60 minutes at 20°C
Cleaner / Thinner: -
Shelf Life: 60 months from date of production unopened or 'use by' date where specified
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use