Shop Primers

An acrylic primer which contains anti-corrosive pigments and can be thinned with water.

Provides excellent adhesion and is particularly suitable if the use of solvents is not permitted, due to Health and Safety reasons.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A protective anti-corrosion metal primer with excellent adhesive and rust prevention properties.

A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

Formulated as a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning.

A two component polyamide cured waterborne epoxy primer which is particularly suitable when solvents are not permitted, for health and safety reasons.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.