Hempel Zinc Primer 16490

SKU
ID23895
UN1263 (Class: 3, Pk Grp: II)
A single pack, quick drying primer for steel.
Available in 4 Litres
£79.54 £66.28
In stock
Product Description

Hempel Zinc Primer 16490 is a single pack primer, phenoxy coating with a high content of zinc.

Best Uses

Zinc Primer 16490 is best used as a protective primer on steel in severely corrosive environments. It can also be used for the repair of galvanizes steel, Galvosil and other zinc rich coatings.

Application

Application is by airless spray or brush. Please note that if you use a brush to apply the product, more coats will be required to achieve the specified dry film thickness.

Ensure all products are clean and dry before application. Remove any oil, grease and other contaminants using a suitable detergent. Salts, detergents and other contaminants can be cleaned by high pressure fresh water cleaning.

New build

  • Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC).
  • Remove dust, blast media and loose materials.

Maintenance and Repair

  • Minor areas may be hand or power tool cleaned instead of abrasive blasting.
  • Remove dust, blast media and loose materials.

Roughness

  • Surface profile Medium (G) (ISO 8503-2)

Suitable Thinner

Hempel Thinner 08450

Technical Details
Components: Single Pack
Type: Phenoxy coating with a high content of zinc
Finish: Flat
Stock Colours: Grey 19840
Tintable: No
VOC Content: 566 g/L
Volume Solids: 33 ± 2%
Suitable Substrates: Steel
Application Method: Brush, Airless Spray
Theoretical Coverage: 10 m²/L
Wet Film Thickness (WFT): 110µm
Dry Film Thickness (DFT): 35µm
Touch Dry: 15 minutes at 20°C
Hard Dry: 30 minutes at 20°C
Overcoating: Recommended products are: Hempadur, Hempatex
Thinner: Thinner 08450
Cleaner: Thinner 08450 / Tool Cleaner 99610
Shelf Life: 12 months from date of production unopened or 'use by' date where specified
Packaging: Available in 4 Litres