Hempel Tool Cleaner 99610

SKU
id19351
UN1263 (Class: 3, Pk Grp: III)
For cleaning of tools that have been used for mixing or application of two-component epoxy products.
Available in 5 and 20 litres
From £29.12 £24.27
In stock
Only %1 left
Product Description

Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. It has better cleaning properties than epoxy thinners.

Best Uses

Hempel Tool Cleaner 99610 is best used for cleaning of brushes, paint rollers, spray equipment, and other tools which have been used for mixing or application of HEMPADUR products.

Note: Do not use as thinner for any paint.

Application

Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

Cleaning should take place as soon as possible after use of the tools. Spray equipment does not require rinsing or flushing after use of the product. Do not use on cloth, linoleum, plexiglass, plastics, asphalt floors and similar. Do not use it for cleaning of equipment before and after application of polyurethanes (HEMPATHANEs).

Technical Details

Technical Info

Components: Single Pack
Type: Solvent Based
Finish: n/a
Stock Colours: Transparent
Tintable: No
VOC Content: 710 g/l [5.9 lbs/US gallon]
Volume Solids: 0%
Flash Point 28 °C [82.4 °F]
Specific Gravity: 0.9 kg/litre [7.4 lbs/US gallon]
Suitable Substrates: Cleaning of brushes, paint rollers, spray equipment, & other tools which have been used for mixing or application of HEMPADUR products
Spray Equipment:  Spray equipment does not require rinsing or flushing after use of the product

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use