This product is part of the Network Rail Specification NR/L3/CIV/039
Hempathane 55810 HS is a two component polyurethane topcoat, cured with aliphatic isocyanante, with very good gloss and colour retention.
Hempathane 55810 HS is recommended for use as a low VOC finishing coat for the protection of structural steel in severely corrosive atmospheric environments.
Hempathane 55810 HS should be applied with an airless spray or brush. Surfaces should be completely clean and dry and above the dew point to avoid condensation. Minimum curing temperature is -10°C.
Hempathane 55810 HS is for use on structural steel in severely corrosive atmospheric environments.
|Stock Colours:||Just tints|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||363.0g per Litre|
|Suitable Substrates:||For steel|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||16.3 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||40 microns|
|Pot Life:||4 hours at 20°C|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||Depending on specification|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||HEMPEL'S THINNER 08080|
|Shelf Life:||3 years for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.