Hempel Hempadur 47960 is a high build epoxy paint for use as a primer, mid or finish coat, depending on levels of atmospheric corrosion.
Hempadur 47960 is a two-component high build epoxy paint which combines a high volume solids content with quick drying properties. Hempadur 47960 is VOC compliant, has prolonged re-coating properties and is pigmented with zinc phosphate.
Hempadur 47960 is recommended for use as a primer in atmospheric environments. It can also be used as an intermediate or finishing coat in epoxy systems, for medium to severely corrosive atmospheric environments.
Hempadur 47960 is for professional use only. It should be applied to clean and dry surfaces, with temperatures above dew point to avoid condensation. New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPADUR 47960.
Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 0°C/32°F. The temperature of the paint itself should be: 15-25°C/59-77°F to secure proper application properties. In confined spaces provide adequate ventilation during application and drying. It is important that the surface is completely clean to ensure the adhesion. Any oil, grease, etc. to be removed by suitable detergent.
Surface and Environment
New steel surfaces should be mechanically blasted, before the application of Hempadur 47960. All surfaces should be completely clean and free from oil or grease. Adequate ventilation should be provided, in confined spaces, during the application and drying process.
- Part of the Network Rail Specification NR/L3/CIV/039
- Certificate number N1/109, N1/110, N9/036 and N9/037
|Type:||Polyamide Adducts Cured|
|Stock Colours:||11480 Grey|
|Tintable:||Yes, upon request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||245.0g per Litre|
|Suitable Substrates:||For steel|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||6 m2 per litre at 125 microns|
|Wet Film Thickness (WFT):||175 microns|
|Dry Film Thickness (DFT):||125 microns|
|Pot Life:||1 hour at 20°C|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||According to specification|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Clean tools with HEMPEL'S TOOL CLEANER 99610. Thinner required depending on purpose. Usually less than: 5% HEMPEL'S THINNER 08450|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.