£9.95 delivery on orders excluding certain products & postcodes *
This product is part of the Network Rail Specification NR/L3/CIV/039
Hempathane 55810 HS is a two component polyurethane topcoat, cured with aliphatic isocyanants, with very good gloss and colour retention.
Hempel Hempathane 55810 HS is recommended for use as a low VOC finishing coat for the protection of structural steel in severely corrosive atmospheric environments.
Hempathane 55810 HS should be applied with an airless spray or brush. Surfaces should be completely clean and dry and above the dew point to avoid condensation. Minimum curing temperature is -10°C.
Hempathane 55810 HS is for use on structural steel in severely corrosive atmospheric environments.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Components: | Two Part |
Type: | Polyurethane |
Finish: | High Gloss |
Stock Colours: | Just tints |
Tintable: | Yes. Please note, bespoke tints are non-refundable / exchangeable |
VOC Content: | 363.0g per Litre |
Volume Solids: | 64% |
Suitable Substrates: | For steel |
Application Method: | Brush or Airless Spray |
Theoretical Coverage: | 16.3 m2 per litre at 50 microns |
Wet Film Thickness (WFT): | 75 microns |
Dry Film Thickness (DFT): | 40 microns |
Induction Time: | - |
Pot Life: | 4 hours at 20°C |
Touch Dry: | 30 minutes at 20°C |
Overcoatable: | Depending on specification |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | HEMPEL'S THINNER 08080 |
Shelf Life: | 3 years for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production |
Packaging: | Available in 5 Litres |