International Interthane 990 is suitable for use in both new construction and as a maintenance finish (Network Rail M24 System, Highways Agency Approved - Item No. 168) which can be used in a wide variety of environments including offshore structures, chemical and petrochemical plants, bridges, pulp and paper mills, and in the power industry.
All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000.
Interthane 990 should always be applied over a recommended anti-corrosive coating scheme. The primer surface should be dry and free from all contamination and Interthane 990 must be applied within the overcoating intervals specified (consult the relevant product data sheet). Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) or SSPC-SP6, Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch primed prior to the application of Interthane 990.
The following primers/intermediates are recommended for Interthane 990:
|Stock Colours:||Only tints|
|Tintable:||Wide range via the Chromascan system. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||341.0g per Litre|
|Suitable Substrates:||For metal surfaces|
|Application Method:||Airless Spray, Air Spray, Brush or Roller|
|Theoretical Coverage:||11.4 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||88 - 132 microns|
|Dry Film Thickness (DFT):||50 - 72 microns|
|Touch Dry:||150 minutes at 15°C|
|Overcoatable:||After 10 hours at 15°C|
|Hard Dry:||10 hours at 15°C|
|Cleaner / Thinner:||Clean all equipment immediately after use with International GTA713.|
|Shelf Life:||24 months (Part A) & 12 months (Part B) minimum at 25°C (77°F) Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.