This product is part of the Network Rail/Railtrack RT98 Systems M20, M21, M24, M34, N1, N2, N4 and N9.
Jotun Hardtop XP is high gloss, high solids two component polyurethane paint coating formulated for providing a durable water and weather resistant finish in aggressive atmospheric environments. Jotun Hardtop XP is Highways Agency (Item No.168), Network Rail/Railtrack approved.
Jotun Hardtop XP is recommended marine structures and offshore environments, refineries, power plants, bridges and buildings. It is also suitable for a range of industrial structures.
Jotun Hardtop XP is suitable for new applications and maintenance coatings on steel structures. It offers good colour and gloss retention and should be used in conjunction with Jotun Hardtop base, as an intermediate coat.
Jotun Hardtop XP has a glossy finish with very good gloss retention. It is a high solids product and should be applied with a low dry spray. Roller or brush application is possible, please see application guide for more information.
Jotun Hardtop XP is a high gloss topcoat for use over most epoxy systems and where a durable, weather-resistant finish is required. It is ideal for a wide range of structures within aggressive atmospheric locations.
Jotun Hardtop XP drying times are generally related to air circulation, temperature, film thickness and the number of required coats. The temperature of the substrate should be a minimum 5°C and at least 3°C above the dew point of the air, temperature and relative humidity.
Good ventilation is required in confined areas to ensure correct drying.
|Type:||Chemically curing aliphatic acrylic polyurethane coating|
|Stock Colours:||Just tints|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||336.0g per litre|
|Suitable Substrates:||Compatible previous coats|
|Application Method:||Air Spray, Airless Spray, Brush or Roller|
|Theoretical Coverage:||12.6 - 6.3m2 per litre|
|Wet Film Thickness (WFT):||80 - 160 microns|
|Dry Film Thickness (DFT):||50 - 100 microns|
|Pot Life:||1.5 hours at 23°C|
|Touch Dry:||6 hours at 10°C|
|Overcoatable:||14 hours at 10°C|
|Fully Cured:||14 days at 10°C|
|Cleaner / Thinner:||Jotun Thinner No. 10, Jotun Thinner No. 26|
|Shelf Life:||48 months|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.