Jotun Jotamastic 80 Aluminium

SKU
id17014
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
Available in 5 and 20 Litres
From £68.69 £57.24
In stock
Only %1 left
Product Description

Jotamastic 80 Aluminium is part of the M24 system. A two part epoxy coating where optimum preparation is difficult but a long lasting protective coating is essential.

This product is part of the Network Rail/Railtrack RT98 Systems M20, M24 and N9

Jotamastic 80 Aluminium is a two component polyamine cured epoxy mastic coating. It is specifically designed for areas where an optimum surface preparation is not possible or required. Jotamastic 80 Aluminium can also be applied at sub zero surface temperatures.

Best Uses

Jotamastic 80 Aluminium is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.

Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Application

Jotamastic Aluminium should be applied with an airless spray. A brush or roller may be used but care must be taken to achieve the specified dry film thickness. To provide a base for lasting adhesion, all surfaces should be clean, dry and free from contamination.

Surfaces and Environment

Jotamastic 80 Aluminium is suitable for carbon and shop primed steel and other coated surfaces. It is primarily designed for maintenance and repair projects.

Technical Details

Approvals

  • This product is part of the Network Rail/Railtrack RT98 Systems M20, M24 and N9
  • Certificate numbers XM92/M20-148, XM92/M20-149, XM92.M24-122, XM92.M24-123, XM92.M24-124, XM92/M24-125, XM92.M24-126 and XN90/N9-069
  • Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
  • Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
  • Norsok M-501 System 1 (Pre Qualified)
  • Norsok M-501 System 4 (Pre Qualified)

Technical Info

Components: Two Part
Type: Polyamine cured epoxy mastic coating
Finish: Gloss
Stock Colours: Aluminium, Aluminium Red Toned
Tintable: No
VOC Content: 249.0g per litre
Volume Solids: 80%
Suitable Substrates: Suitable for properly prepared carbon steel and aged coating surfaces
Application Method: Airless Spray, Brush or Roller
Theoretical Coverage: 10.7 - 4m2 per litre
Wet Film Thickness (WFT): 95 - 250 microns
Dry Film Thickness (DFT): 75 - 200 microns
Induction Time: 10 mins at 23°C
Pot Life: 2 hours at 23°C
Touch Dry: 8 hours at 10°C
Overcoatable: 24 hours at 10°C
Fully Cured: 14 days at 10°C
Cleaner / Thinner: Jotun Thinner No. 17
Shelf Life: 48 months
Packaging: Available in 5 and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use