Jotun Thinners No.17 is a solvent based thinners suitable for use on many Jotun products such as Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.
Jotun Thinners No. 17 is best used in combination with the Jotun and Jotamastic product range. With excellent thinning properties, you can ensure you achieve the right coverage rate and/or effectively remove grease and oil from the surface before the application of any Jotun product. You can also use Jotun Thinners No. 17 for thinning epoxies and similar paint products. Designed to improve the flow of a range of Jotun epoxy products. Can also be used as cleaner for pumps and tools before and after painting.
Jotun Thinners No. 17 can be applied using a sponge or a rag as a thinner or cleaner. This thinner is easy to apply as you need only add it to the paint slowly, and to the percentage requested by the Jotun product. You can also use this thinner to clean up pain after use. Please call if you require further information.
Jotun Thinners No. 17 is not suitable for use with Tankguard products, however you should ensure you look at the Jotun product itself that you intend to use and you will be able to determine whether or not the surface is suitable for application.
|VOC Content:||866.0g per litre|
|Shelf Life:||48 months|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.