Jotun Penguard Express ZP is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel to enhance corrosion protection.
This product is part of the Network Rail/Railtrack RT98 Systems M20, M21, N2 and N4.
Penguard Express is an anti-corrosive primer or intermediate coat. Penguard Express ZP is pigmented with zinc phosphate for increased corrosion protection. Areas of application range from structural steel to constructions exposed to tough atmospheric environment. Specially designed for new construction where short dry to handle and over coating times are required. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for properly prepared carbon steel substrates. It can be applied at sub zero surface temperatures.
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
|Type:||Amine cured epoxy coating|
|Stock Colours:||Grey and Red|
|VOC Content:||277.0g per litre|
|Suitable Substrates:||Properly prepared carbon steel substrates|
|Application Method:||Airless Spray or Brush|
|Theoretical Coverage:||9.9 - 3m2 per litre|
|Wet Film Thickness (WFT):||100 - 340 microns|
|Dry Film Thickness (DFT):||75 - 250 microns|
|Pot Life:||2 hours at 23°C|
|Touch Dry:||2 hours at 10°C|
|Overcoatable:||4 hours at 10°C|
|Fully Cured:||8 days at 10°C|
|Cleaner / Thinner:||Jotun Thinner No. 17|
|Shelf Life:||24 months|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.