Axalta Vitershield SPF Epoxy Primer / Finish

A 2 pack epoxy for blast cleaned steelwork. Low temperature curing and high build airless spray capability.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£52.02

Inc VAT £62.42

PRODUCT DETAILS

Axalta Vitershield SPF Epoxy Primer / Finish is a two pack epoxy, mid-sheen primer/finish for blast cleaned steelwork.

Best Uses

Axalta Vitershield SPF Epoxy Primer / Finish is a two pack anti-corrosive primer / finish that provides low temperature curing and high build airless spray capability.

Low temperature curing (down to 0ºC) and low tendency to bloom
Use as an anti-corrosive primer/undercoat or primer/finish for general structural steelwork
Good resistance to undercutting from damaged areas
Overcoatable with most epoxy, acrylic or polyurethane coatings
Use as a base coat for most thin film intumescent coatings

Application

Blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns. All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams.

Apply via airless or conventional spray. Application by brush/roller will result in a reduced film thickness and is recommended only for small areas of touch up/remedial work.

Minimum overcoating with 2p polyurethanes and non isocyanate (i.e. Axalta ViterThane PLV or PLS, or ViterSeal EA80): allow a minimum 6 hours at 23ºC, when SPF has been applied to 75-100 DFT.

TECHNICAL

Components:	Two Pack
Type:	Epoxy
Finish:	Mid Sheen
Stock Colours:	RAL 7024
Tintable:	Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:	421 g/L
Volume Solids:	60%
Suitable Substrates:	Steelwork
Application Method:	Brush, Roller, Conventional or Airless Spray
Theoretical Coverage:	3 - 8 m2 per litre
Wet Film Thickness (WFT):	125 - 333 microns
Dry Film Thickness (DFT):	75 - 200 microns
Induction Time:	-
Pot Life:	8 hours at 23°C
Dust Free:	30 minutes at 23°C
Overcoatable:	After 4 hours minimum at 23°C
Fully Cured:
Cleaner / Thinner:	Thinner: Axalta 1031 Thinner. Cleaner: Axalta 950 Thinner
Shelf Life:	Minimum 12 months if stored as above in unopened containers.
Packaging:	Available in 5 Litres