Sherwin Williams Cleanser Thinner C9 is best used as per data sheets for the relevant products. If you need further info in regards your requirements contact our technical team.
Sherwin Williams Cleanser Thinner C9 can be applied via brush, roller or spray depending on the associated product.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A high solids, 2 pack epoxy comprising of lead free colouring pigments, micronised glass flake and anti corrosive pigments.
A high build aluminium epoxy maintenance primer for abraded surfaces. Highways Agency Item No.115
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.
An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.
A winterfast hi build undercoat formulated for low temperature curing down to 0°C.