Sherwin Williams Macropoxy K267 MIO - Formerly Leighs Transgard TG121 Macropoxy 1210

Sherwin Williams K267 MIO is part of the N9/038 spec and Highways Item No.121. A 2 pack epoxy, pigmented with MIO (micaceous iron oxide) used with Sherwin Williams Macropoxy high performance primers on galvanised steel.

Best Uses

Sherwin Williams K267 MIO is part of the N9/038 specification as well as Item No.121. K267 MIO is best used as an intermediate coat in conjunction with Macropoxy high performance primers, or used as a primer for painting galvanised steel.

Application

Ensure surfaces to be coated are clean, dry and free from all surface contaminants. Galvanised substrates should be prepared via degreasing, mordant wash solution, or abrasion via sweep blasting.

Apply Macropoxy K267 with airless spray, conventional spray, brush or roller. Indefinitely overcoatable with epoxy systems provided the surface is suitably cleaned. Compatible with a wide range of Macropoxy, Dura-plate, Zinc Clad Epoxy Primers and build coats.

Where a high degree of gloss and colour retention is required overcoating with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum DFT of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.