Sherwin Williams Envirolastic 2500

SKU
id25968
Part A and B: UN1263 (Class: 3, Pk Grp: III)
Suitable for use in a range of markets where durable performance and aesthetics are needed.
Available in 15 Litres
From £377.63 £314.69
In stock
Only %1 left
Product Description

Sherwin Williams Envirolastic 2500 is a single coat, direct to metal polyaspartic primer/finish or a topcoat over approved primers. It is a fast dry polyaspartic technology formulated to provide anti-corrosion, resistance to mechanical damage, gloss & colour retention and low VOC.

ISO 12944:2018 approved to C3, C4 and C5 environments.

Best Uses

Envirolastic 2500 is suitable for use in a range of markets where durable performance and aesthetics are needed.

Key market segments include infrastructure, stadiums, oil & gas, mining & minerals and power.

Envirolastic 2500 is ideal for application to large steel structures and OEMs such as dockyard equipment, cranes, machinery & conveyer systems.

Externally pre-qualified in accordance with BS EN ISO12944-6:2018 for use in C3, C4 & C5 environments.

Application

Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion. Refer to product Application Bulletin for detailed surface preparation information.

Examples of use by applications

Infrastructure:

  • Bridges
  • Cranes
  • Commercial buildings
  • Manufacturing plants
  • Sporting arenas
  • Transportation hubs
  • Warehouses

Energy:

  • Biomass plants
  • Waste-to-energy
  • Thermal power plants
  • Conveyor belts
  • Piping and valves
  • Pumps
Technical Details

Approvals

  • ISO 12944:2018 approved to C3, C4 and C5 environments

Technical Info

Components: Two Pack
Type: Polyaspartic
Finish: Gloss
Stock Colours: Wide range of colours available
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 190 g/lt
Volume Solids: 78% ± 2%, mixed, may vary by colour
Suitable Substrates: Iron and Steel
Application Method: Airless Spray or Conventional Spray, Brush or Roller
Theoretical Coverage: -
Wet Film Thickness (WFT): Min: 130 microns, Max: 300 microns
Dry Film Thickness (DFT): Min: 100 microns, Max: 225 microns
Induction Time: -
Pot Life: 60 - 75 minutes
Touch Dry: 30 minutes at 20°C
Overcoatable: After 60 minutes at 20°C
Fully Cured: -
Cleaner / Thinner: Thinning: Thinner no.15 and Cleaning: Thinner no.9
Shelf Life: 6 months unopened, stored indoors.
Packaging: Available in 15 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use