Tikkurila Temabond ST200

Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469 (Class 3, Pk Grp: III)
A Two-Component Aluminium Maintenance Paint For Use on Steel.
Available in 5 Litres
£68.70 £57.25
In stock
Product Description

Tikkurila Temabond ST200 is a two-component, aluminium, epoxy maintenance paint which is ideal for use on steel structures with demanding surfaces.

Best Uses

Temabond ST200 is the perfect solution for repainting steel surfaces that are difficult to clean. These include areas such as bridges, cisterns, hydro power stations, and different types of steelwork and equipment in the wood-processing and chemical industries. ST200 is suitable for both interior and exterior use.


All surfaces should be cleaned and dry before application. All oil, grease, salts and dirt should be removed by the appropriate means.

First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Ensure you use a power mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.

Please note: There is a natural tendency of this coating to chalk, discolour or yellow unevenly. It is therefore recommended to use a polyurethane topcoat when there are high aesthetical requirements on colour appearance.

Recommended Primers

  • Temazinc 77
  • Temazinc 99
  • Temacoat SPA Primer
  • Temacoat Primer

Recommended Topcoats

Technical Details

Features and Benefits

  • An ideal solution for maintenance painting due to its very good adhesion even to hand-prepared steel. As a high-solids product, the paint has lower VOC emissions than conventional epoxy paints.
  • Withstands immersion in water and can therefore be used e.g. on steel structures immersed in water or buried in soil.
  • Due to its aluminium pigmentation, Temabond ST 200 forms a very tight film with good chemical and abrasion resistance. The paint is used in systems for repainting and touch-up painting steel surfaces that are difficult to clean, such as bridges, cisterns and different types of steelwork and equipment in the wood-processing and chemical industries.
  • High film build properties, also by brush.
  • Can also be applied on old alkyd paint surfaces.
  • Can be used as a single coat paint.
  • Winter grade version Temabond WG 200 can be cured at lower temperatures.
  • Recommended for repairing of damages caused by transport or installation

Technical Info

Components: Two Pack
Type: Solvent Based
Finish: Semi-Gloss
Stock Colours: Aluminium
Tintable: No.
VOC Content: 200 g/l
Volume Solids: 80±2%
Suitable Substrates: Metal
Application Method: Brush or Airless Spray
Theoretical Coverage:  8m/litre @ 100µm
Wet Film Thickness (WFT): 125µm
Dry Film Thickness (DFT): 100µm
Induction Time: -
Pot Life: 1½ hours 23°C
Touch Dry: 3 hours at 23°C
Overcoatable: 6 hours at 23°C
Cleaner / Thinner: Thinner 1031
Shelf Life: See tin for shelf life and storage instructions
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products