£9.95 delivery on orders excluding certain products & postcodes *
Temacoat GPL-S Primer is recommended for use on bridges, haulage equipment, cranes, steel masts, conveyors and other steelwork, machinery and equipment. It can be used as an intermediate coat on zinc-rich epoxy and zinc silicate paints.
All surfaces must be clean, dry and fully prepared as per the product data sheet before application. This product should not be applied at temperatures below 0°C where there is a possibility of ice formation on the substrate. Application is by Airless Spray or Brush.
Please Note
Hardener 008 5600 is supplied as the default hardener for this product. If you require an alternative hardener, please enquire before making your purchase.
Components: | Two Pack |
Type: | Solvent Based |
Finish: | Matt |
Stock Colours: | White |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 425 g/litre |
Volume Solids: | 55 ± 2 % |
Suitable Substrates: | Cladding, steel, zinc and aluminium |
Application Method: | Brush, Airless Spray |
Theoretical Coverage: | 9m2 per litre at 70 microns |
Wet Film Thickness: | 110 μm |
Dry Film Thickness: | 60 μm |
Induction Time: | - |
Pot Life: | 6 hours at 23ºC with Hardener 008 5600 |
Touch Dry: | 2.5 hours at 23°C with Hardener 008 5600 |
Overcoatable: |
2 hours at 23°C with epoxy paints 6 hours at 23°C with polyurethane paints |
Fully Cured: | - |
Cleaner / Thinner: | Tikkurila Thinner 1031 |
Shelf Life: | See packaging |
Packaging: | Available in 3 Litres, 10 Litres and 20 Litres |