Carboline Carbozinc 11

SKU
id23744
Part A: UN1263 (Class: 3, Pk Grp: II), Part B: Non Hazardous
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
Available in 7 Litres in Green
£172.80 £144.00
In stock
Product Description

Carboline Carbozinc 11 is a time tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments.

For over 50 years, Carboline Carbozinc 11 has been the industry standard for high performance inorganic zinc protection on steel structures worldwide.

Best Uses

Carboline Carbozinc 11 is formulated for use in C3, C5, C5 immersion and CX environments. This product is formulated for use as a steel primer for tank linings and high temperature coatings.

Suitable for use within the following markets: Commercial & Architectural, Bridge & Highway, Metals & Mining, OEM, Commercial Marine, Oil & Gas Midstream, Power - Conventional, Oil & Gas Upstream, Pharmaceutical, Water & Wastewater, Rail, Pulp & Paper and Petrochemical industries.

This inorganic zinc coating benefits from rapid curing and will be dry to handle in 45 minutes at 16°C. Carboline Carbozinc 11 can also cure at low temperatures down to -18°C.

  • High zinc loading
  • Very good resistance to salting
  • May be applied with standard airless or conventional spray equipment
  • Will cure at temperatures as low as -18°C
  • VOC compliant in many areas

Without using a topcoat, this product can withstand a maximum service temperature of 400°C continuously. If used with one of Carbolines recommended high temperature resistant topcoats, systems can withstand 540°C continuous temperatures.

Suitable to be topcoated with Carboline waterborne acrylics, epoxies, polyurethanes, high-temperature silicones and other coatings.

Application

Ensure to fully mix both components as per data sheet guidance prior to use. Thin as per recommendations in application guide. Apply via airless or conventional spray. Use a brush for touch up of small areas only.

Technical Details

Approvals & Features

  • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
  • Meets SSPC Paint 20 Type I, Level 1 for zinc content
  • Meets FDA requirements

Technical Info

Components: Two Pack
Type: Solvent Based Inorganic Zinc
Finish: Flat
Stock Colours: Green
Tintable: No
VOC Content: 492 g/L
Volume Solids: 62%
Suitable Substrates: Steel
Application Method: Brush, Conventional Spray, Airless Spray
Theoretical Coverage: 24.5m2 per litre at 25 microns DFT
8.2 m2 per litre at 75 microns DFT
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 51 - 76 microns
Induction Time: -
Pot Life: 8 Hours at 24°C
Dry To Handle: 45 minutes at 16°C
Dry To Topcoat: 24 hours at 16°C
Cured For Immersion: 3 days at 16°C
Cleaner / Thinner: Use Carboline Thinner 21 or Isopropyl Alcohol.
Shelf Life: 1 year minimum in original unopened containers.
Packaging: Available in 7 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use