PPG PSX 700 Engineered Siloxane is a two component engineered siloxane coating designed to offer unique, high gloss and colour retention. PSX 700 Engineered Siloxane can be bought in variety of different colours, in full gloss finish. Highways Agency Item No.185.
PPG PSX 700 Engineered Siloxane can be applied directly over inorganic zinc and other metal substrates to offer excellent resistance to splashes and spillages from chemicals. PSX 700 Engineered Siloxane can be used on multiple different surfaces such as walls, floors, ceilings and different forms of solid furniture. Also suitable for use on wind farms.
PPG PSX 700 Engineered Siloxane can be applied using brush, roller or spray and is touch dry in just 2 hours, ready for a recoat after 3 hours. PSX 700 Engineered Siloxane is quick and easy to apply and produces an immaculate glossy finish that we can guarantee you will appreciate.
For lighting columns, the standard PPG lighting column specification recommends that galvanised steel surfaces are prepared by thorough cleaning, degreasing and washing, followed by abrasion by belt sanding, followed by application of the following:
SigmaCover 280 Primer at 50 microns
Sigmarite 4560GF (previously Amercoat 4560GF) at 300microns
PSX700 at 100 microns
PPG PSX 700 Engineered Siloxane is a high quality coating which can be used on a number of different substrates internally. PSX 700 Engineered Siloxane has been highly recommended for use for London Underground due to its durability on surfaces which are regularly exposed to chemicals, abrasion and impact from trains and people.
PPG PSX 700 is used within the following PPG systems:
See Data Sheets tab for System sheet downloadable PDF.
|Stock Colours:||White and Black|
|Tintable:||Available in a full colour range. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||164.0g per Litre|
|Suitable Substrates:||For metal surfaces|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||7.2 m2 per litre at 125 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||75 - 172 microns|
|Pot Life:||4 hours at 20°C|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 3 hours at 20°C|
|Cleaner / Thinner:||PPG Thinner 60-12, PPG Thinner 21-06, PPG Thinner 21-25|
|Shelf Life:||Base: 36 months, Hardener 24 months when stored cool and dry|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.