CX Environments

CX Environments are exterior offshore areas with high salinity, industrial areas with extreme humidity and tropical atmospheres. Internally, they are industrial areas with extreme humidity. In accordance with ISO 12944:2018 in accordance with Part 9. All offshore systems must continue to go through 4,200 hours of cycling testing, which equates to 25 weeks.

Scroll to the bottom of this page for a full list of suppliers and their specifications.


Download the manufacturer specifications for steel systems below:

Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teknos
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Substrate Steel, Blasted Remove This Item
Filter by

5 Items

Set Descending Direction
  1. Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer
    Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer

    A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

    From £227.36 £189.47
  2. International Interzinc 52E
    International Interzinc 52E

    A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

    From £347.63 £289.69
  3. Carboline Carbozinc 11
    Carboline Carbozinc 11

    Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

    From £257.04 £214.20
  4. Hempel Hempaxane Light 55030
    Hempel Hempaxane Light 55030

    A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

    From £265.33 £221.11
per page