£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

Hempel Hempadur 15590

SKU
id21157
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
Available in 20 Litres in 56880 Red
£178.06 £148.38
In stock
main product photo
Product Description

Hempel Hempadur 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

Best Uses

Hempel Hempadur 15590 is formulated as a blast primer for heavy duty epoxy systems on submerged and non-submerged areas according to industrial specification. Recommended systems are: Hempel Hempadur Multi-Strength 35530, Hempel Hempadur Multi-Strength 45751. Hempel Hempadur 15590 can be used as a blast primer.

Application

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 8501-1: 2007) with a surface profile corresponding to Rugotest No. 3, N9a to N10, preferably BN9a to BN10, Keane-Tator Comparator, 2.0 G/S or ISO Comparator, Medium (G). After blasting, clean the surface carefully from abrasives and dust.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. On pit-corroded surfaces, excessive amounts of salt residues may call for high pressure water jetting, wet abrasive blasting or, alternatively, dry abrasive blasting, high pressure fresh water hosting, drying, and finally dry abrasive blasting again.

Apply via airless spray.

Technical Details
Components: Two Pack
Type: Solvent Based
Finish: Semi Gloss
Stock Colours: 56880 Red
Tintable: No
VOC Content: 493 g/L
Volume Solids: 44%
Suitable Substrates: For steel and new steel
Application Method: Airless Spray
Theoretical Coverage: 11 m2 per litre at 40 microns
Wet Film Thickness (WFT): See data sheet
Dry Film Thickness (DFT): See data sheet
Induction Time: -
Pot Life: 2 hours at 20°C
Surface Dry: 1 hour at 20°C
Overcoatable: See data sheet
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Hempel Thinner 08450 (5%)
Shelf Life: 1 year for BASE and 3 years for CURING AGENT (stored in closed container) (25°C/77°F) from time of production. Depending on storage conditions, mechanical stirring may be necessary before usage.
Packaging: Available in 20 Litres
Product Data Sheet (87.83 kB)
Safety Data Sheet - Part A (162.23 kB)
Safety Data Sheet - Part B (159.38 kB)
System Info - Project Job Sheet (89.24 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products