Hempel Hempadur 85671

A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.

Available in 20 Litres. Tintable upon request.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£254.90

Inc VAT £305.88

PRODUCT DETAILS

Hempel Hempadur 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating with very good adhesion and high temperature, water and chemical resistance.

Best Uses

Hempel Hempadur 85671 is formulated for use as an interior lining in tanks, pipelines, railcars etc. for hot water, brine, crude oil, vegetable oils and other chemicals as per the Chemical Resistance Guide, ONLY shades 11150 and 50900. ALL other shades including Aluminium (19000) can ONLY be used as an external coating for the protection of insulated (CUI) and uninsulated process pipework and vessels, including cryogenic conditions.

Service Temperatures

In crude oil: Maximum: 130°C/266°F
In vegetable oils: Maximum: 60°C/140°F
In water (maximum gradient 15°C/27°F): 95°C/203°F

TECHNICAL

Approvals

In accordance with ARAMCO's specification APCS 2A, 2B and 2C
Conforms to Norsok M-501, system no. 3C, 3D, 3E and 3F
Complies with Section 175.300 of the Code of Federal Regulations Title 21 – Liquid and Dry Foodstuff
Approved by WRAS (number 1708542) for potable water up to 23°C/73°F. Shades:11150 Light Grey / 50900 Light Red

Technical Info

Components:	Two Pack
Type:	Amine Adduct Cured Phenolic Epoxy Novolac
Finish:	Flat
Stock Colours:	11150 Light Grey, 11630 Off White, 50900 Light Red, 19000 Aluminium
Tintable:	Yes, upon request. Please note, bespoke tints are non refundable / exchangeable
VOC Content:	317 g/L
Volume Solids:	68%
Suitable Substrates:	For interior lining of tanks, pipelines, railcars for the storage of hot water, brine, crude oil, vegetable oils and other chemicals. Some shades (19000 Aluminium) is suitable for unisulated process pipework and vessels including cryogenic conditions
Application Method:	Airless spray / Brush (touch up)
Theoretical Coverage:	6.8 m2 per litre for 100 microns
Wet Film Thickness (WFT):	150 microns
Dry Film Thickness (DFT):	100 microns
Induction Time:	-
Pot Life:	3 hours at 20°C
Surface Dry:	1.5 hours at 20°C
Overcoatable:	See data sheet
Fully Cured:	7 days at 20°C
Cleaner / Thinner:	HEMPEL'S THINNER 08450
Shelf Life:	1 year for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production. Shelf life is reduced at storage temperatures above: 25°C/77°F
Packaging:	Available in 20 Litres