PPG Novaguard 890 LT

Part A: UN (Class: , Pk Grp: ), Part B: UN2922 (Class: 8, Pk Grp: II)
Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.
Available in 20 Litres
From £945.06 £787.55
In stock
Only %1 left
Product Description

PPG Novaguard 890LT is a low-temperature cure, solvent-free Novolac phenolic, which offers exceptional resistance to a wide range of chemicals. The advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.

Best Uses

PPG NOVAGUARD 890LT is approved for aviation fuel storage tanks and pipes, It is suitable for new-build or refurbishment.


  • Single-coat system applied directly to steel or over an approved primer
  • Suitable for application at new construction and major refurbishment
  • Excellent application characteristics – single-feed airless application
  • Cures down to -10°C
  • Can be applied on surfaces down to 0°C
  • Fast return to service: inspection at 18hrs – return to service 36hrs (20°C)
  • High chemical resistance (E100, crude oil up to 120°C and wide variety of chemicals)
  • Rapid cure and return to service with a broad recoat window
  • Novolac epoxy technology for broad chemical resistance – similar to PPG NOVAGUARD 890
  • Low film thickness required – 300 μm/12 mils
  • High film thickness capable of 1100 μm/45 mils with no sagging


PPG Novaguard 890LT coating is easily sprayed by heavy-duty, single-feed airless equipment as a one-coat system applied directly to blast-cleaned steel or over an
approved blasting primer.

Technical Details

Technical Info

Components: Two Component
Type: Solvent Free
Finish: Gloss
Stock Colours: Cream, Black, Grey-Green
Tintable: No
VOC Content: max. 94.0 g/kg
Volume Solids: 100%
Suitable Substrates: Steel
Application Method: Heavy-duty, single-feed airless equipment. For recommended application instructions, see working procedure
Theoretical Coverage: 3.3 m²/l for 300 μm (134 ft²/US gal for 12.0 mils)
Wet Film Thickness (WFT): Recommendation is to apply a WFT, which is equal to the specified DFT plus 60 μm (2.4 mils)
Dry Film Thickness (DFT): 300 - 600 μm (12.0 - 24.0 mils) depending on system
Induction Time: None
Pot Life: 35 minutes at 20°C (68°F)
Touch Dry: 18 hours at 20°C
Overcoatable: After min 24 hours or max 1 month at 20°C
Fully Cured: See product data sheet
Cleaner / Thinner: Clean with Thinner 90-53 or Thinner 90-83
Shelf Life: 12 months when stored cool and dry, from date of production unopened
Packaging: Available in 20 and 30 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products