PPG Thinner 90-53 is part of the PPG Sigma range of Thinners best used for lowering thickness in particular paint coatings and can be used to clean up paint after use.
PPG Thinner 90-53 can be applied to paint coatings on a percentage scale, and a usage of between 1-10% is usually sufficient to thin a coating ready for use.
PPG Thinner 90-53 can be added to many different PPG Sigma paints and coatings on a variety of different surfaces. This depends on the specifications of the Sigma paint that requires the use of 90-53 thinners.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.