PPG NovaGuard 650

SKU
id21619
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: II)
A two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.
Available in 20 Litres
From £350.06 £291.72
In stock
Only %1 left
Product Description

PPG NovaGuard 650 is a two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.

Best Uses

PPG NovaGuard 650 is formulated as a tank coating for crude oil and aliphatic petroleum products, with a good resistance to various chemicals. This product can be applied by heavy duty, single feed airless spray equipment. PPG NovaGuard 650  has excellent anti-corrosive properties and water resistance.

Application

Blast clean steel to ISO-SA2.5 with a blasting profile of 50 - 100 microns. Ensure substrate temperature is above 5°C and at least 3°C above dew point. Apply using airless spray - heavy duty, single feed airless spray equipment (preferably 60:1 pump ratio). Use a brush or roller for stripe coating and / or spot repair.

Technical Details

Approvals

  • Meets the requirements of EI 1541 2.2 - Coating systems for aviation fuel storage tanks and pipes

Technical Info

Components: Two Pack
Type: Solvent Free Epoxy
Finish: Gloss
Stock Colours: Grey, Off White, Clear
Tintable: No
VOC Content: 30 g/L
Volume Solids: 41%
Suitable Substrates: For tanks and pipes
Application Method: Airless Spray, Brush and Roller
Theoretical Coverage: 3.3 m2 per litre at 300 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT): 300 - 600 microns
Induction Time: -
Pot Life: 45 minutes at 20°C
Touch Dry: 8 hours at 20°C
Overcoatable: Between 12 hours and 6 months at 20°C
Fully Cured:
Cleaner / Thinner: Do not thin. Clean up with PPG Thinner 90-53 or PPG Thinner 90-83
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use