Selemix 7-414 Epoxy Vinyl Primer is 2 pack primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
Please note, the Hardener is not included with this product. Compatible Hardeners are Selemix Direct 9-010 Hardener or Selemix 9-011 Hardener.
Selemix 7-414 Epoxy Vinyl Primer is 2 pack primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats saving valuable time on application reducing the overall labour costs. Additionally it can be left for up to 2 months between coats without the need for sanding when recoating meaning items can be primed stored and coated at a later date.
When used a part of a Selemix paint system with the correct surface preparation and top coat the Selemix 7-414 is ideal for application on to bare steel, black steel, phosphate steel, galvanised steel, stainless steel, phosphate steel, fibre glass reinforced polyester, agricultural equipment, tractors, trailers, harvesters, ploughs, machine tools, milling machines, lathes, drill presses, workshop equipment, cars, trucks, steel structures, garden furniture, bicycle frames, motorcycles, plant equipment, excavators, screed pumps, power barrows, steel doors, garage doors plus many more.
Selemix 7-414 Epoxy Vinyl Primer is best used as a primer coat in a Selemix paint system to provide protection from the elements. Using as part of this system makes the product perfect for application on to bare steel, phosphated steel, stainless steel, galvanised steel, steel structures, machine tools, drill presses, lathes, milling machines, brake presses, guillotines, plant equipment, screed pumps, diggers, dumpers, excavators, earthmovers, power barrow, steel doors, garage doors, roller shutter doors, garden furniture, welfare cabins, electrical cabinets, airport ground support equipment plus many more.
The substrate will need to be suitable abraded and degreased in preparation of receiving a painted finish Selemix 7-414 can be applied by conventional spray equipment. Selemix 7-414 has a theoretical coverage of 5-5.2m2 per litre when applied at a 50 micron dry film thickness.
Selemix 7-414 Epoxy Vinyl Primer will need to be thinned with either of the below prior to use:
Selemix 7-414 Epoxy Vinyl Primer is a 2 pack paint meaning it will need to combined with one of the below hardeners at a general ratio of 4 to 1:
- Selemix 7-414 is a 2 pack epoxy vinyl primer
- Solvent based
- High build
- Pot life 8-10 hours at 20 degrees Celsius
- Can be applied wet on wet
- Recoatable without sanding after minimum 2 hours and maximum 2 months at 20 degrees Celsius
- Touch dry 2-3 hours at 20 degrees Celsius
- Ideal for agricultural and plant equipment
- Theoretical coverage of 5 – 5.2 m2 per litre when applied at 50 micron dry film thickness
- Available in 5 and 20 litres.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.