Selemix 7-410 Epoxy Topcoat is recommended for the painting of industrial equipment and machinery, particularly those situated in an aggressive environment. However. Selemix 7-410 should not be used on exterior surfaces exposed to sunlight if a good level of colour stability is required.
Prepare bare steel by sanding using P80 - 120 - 240 dry. Suitable for application over Selemix 7-413 or 7-414 Primers. Also suitable for application over sandblasted steel. Degrease substrate thoroughly prior to painting. Combine with compatible hardener and thinner as per data sheet. Apply via airless or conventional spray.
|Type:||Epoxy Enamel Resin (Hardener sold separately)|
|Finish:||Gloss or Matt|
|Stock Colours:||Just tints|
|Tintable:||Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||Over compatible Selemix primers, base steel or sandblasted steel.|
|Application Method:||Conventional or Airless Spray|
|Theoretical Coverage:||6.8 - 7.6 m2 per litre at 50μm dry film thickness|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||50 microns|
|Pot Life:||6 - 8 hours at 20°C|
|Dust Free:||30 - 40 minutes at 20°C|
|Overcoatable:||After 3 hour minimum to 24 hours at 20°C without flatting|
|Thorough Dry:||1 hour at 20°C|
|Cleaner / Thinner:||Selemix 1-410 or Selemix 1-400|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.