Selemix 6-560/1 Textured Powder Additive is formulated from a white polyurethane in powder form and can be added to any Selemix single pack and two pack topcoats when slip and abrasion resistance is required. The additive will also have no impact on the colour or drying process and is available in both fine and coarse grain sizes.
When combined with an applicable topcoat it is ideal for application on ferrous steel, black steel, galvanised steel, stainless steel, previous coated steel, zinc sprayed steel, cast iron, agricultural equipment, tractors, trailers, ploughs, tillers, combine harvesters, bailers, muck spreaders, plant equipment, diggers, dumpers, excavators, earth movers, street masters, back hoes, generators, screed pumps, bowsers, pressure washers, power barrows, goods lifts, cars, trucks, motorcycles, airport ground support equipment, welfare cabins, shipping containers, electrical cabins, control panels, roller shutter doors, machine tools, lathes, drill presses, surface grinders, break presses, guillotines, works shop equipment, engine hoists, car jacks, cranes, crawler cranes, lifting equipment, metal shelving, light industrial equipment plus many more
Selemix 6-560/1 is best used in conjunction with any Selemix single or two pack topcoat when a textured finish is required. When used with an applicable topcoat 6-560/1 is ideal for application onto bare steel, stainless steel, iron, ferrous steel, mild steel, zinc sprayed steel, previously coated steel, light industrial equipment, workshop equipment, car jacks, engine hoists, machine tools, lathes, milling machines, surface grinders, pull saws, guillotines, break presses, fly presses, plant equipment, screed pumps, cranes, crawler cranes, diggers, dumpers, excavators, earth movers, bowsers, pressure washers, power barrows, good hoists, chain slings, lifting gear, cars, trucks, motorcycles, welfare cabins, control panels, airport ground support equipment, roller shutters, steel doors, garage doors, shipping containers plus many more
To use Selemix 6-560/1 Textured Powder Additive simply add to any Selemix single or two pack topcoat at a general ratio of 3 to 5% volume depending on the desired level of texture in the finish.
When added to the desired top coat the additive can be applied using either HVLP or airless / airmix spray equipment, if using airless / airmix equipment is recommended that the pump manufacture is contacted prior to use as may cause rapid wearing of mechanical parts and membranes.
Always consult the manufactures technical datasheet prior to use.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Combine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.
An easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.
Formulated with enamel this product has high level of durability, excellent opacity and a high gloss finish, ideal for protecting ferrous steel.
Hardeners are sold separately to the paint so small amounts of paint can be mixed rather than using the whole tin at once.