Selemix 7-610 is part of Selemix range of single pack high gloss topcoats. The product has an excellent level of adhesion and is available in a large range of colours and can also be tinted to most RAL, BS and NCS colour codes. The paint is also fast drying meaning time taken on application and downtime can be reduced making significant cost savings.
When used as part of a Selemix paint system over an applicable primer, the 7-610 is ideal for application onto steel, black steel, light alloys, agricultural equipment, trailers, tractors, harvesters, ploughs, muck spreaders, rotavators, tillers, plant equipment, excavators, power barrows, screed pumps, earth movers, dumpers, cars, trucks, bicycles, motorcycle, steel structures plus many more.
Please note, different gloss levels can be achieved through blending Selemix Fast Dry Binder 7-611 Matt and Selemix Fast Dry Binder 7-610 Gloss. Please see the Matting Chart for further information.
Selemix 7-610 is best used as a topcoat over Selemix primers 7-810 and 7-820, when used as part of this system the product is perfect for providing a high gloss finish and protection for items such as plant equipment, diggers, creed pumps, power barrows, fuel bowsers, excavators, dumpers, earth movers, agricultural equipment, trailers, ploughs, tillers, rotavators, harvesters, tractors, cars, trucks, motorcycles, steel, black steel, light alloys, previously coated steel, steel structures, welfare cabins, electrical cabins, machine tools, lathes, milling machines, drill presses, guillotines, workshop equipment, electrical cabinets, light industrial equipment plus many more.
7-610 Fast Dry Synthetic Single Pack Topcoat can be applied by both airless and conventional spray equipment, when applied at a 50 micron dry film thickness the 7-610 has a theoretical coverage of 6.2-7m2 per litre. Selemix 7-610 is best used as a topcoat Selemix primers 7-810 and 7-820 for best result it is recommended that 2 coats are applied.
7-610 will require thinning with either Selemix Thinners 1-215 or 1-205 prior to application at general ratio of 10 to 1 for airless sprayers and 7 to 2-3 for conventional sprayers, please consult product technical data sheet for applicable ratio before use.
|Stock Colours:||Available in a large range of colours|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|Application Method:||Airless Spray or Conventional Spray|
|Theoretical Coverage:||6.2 - 7.0 m²/l|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||40-50µm|
|Pot Life:||Unlimited hours at 20°C|
|Dust Free:||10-15 minutes at 20°C|
|Touch Dry:||4-5 hours at 20°C|
|Fully Cured:||1-2 days at 20°C|
|Cleaner / Thinner:|
|Shelf Life:||See tin for shelf life and storage information|
|Packaging:||Available in 5 and 20 Litres|
|Matt Fast Dry Binder 7-611||72||60||50||-|
|Gloss Fast Dry Binder 7-610||-||12||22||70|
|Selemix NPXX Tinting Bases||25||25||25||25|
|Driers Solution 6-530||3||3||3||5|
|Gloss Level (60°)||10-20%||30-40%||45-55%||90-95%|
|Refer to TDS no:||541||541||541||540|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A single pack, fast drying, high filling primer with anti-corrosive properties ideal for the protection of ferrous substrates.