An ISO approved paint system, 7-810 will provide excellent protection and adhesion on bare steel, black steel, light industrial equipment, workshop machinery, cars, trucks, metal shelving, agricultural equipment, plant equipment plus many more.
Selemix 7-810 Fast Dry Primer is a single pack industrial undercoat which is easy to use and cost effective for light industrial and commercial applications. It has good filling properties and provides protection for ferrous substrates. Selemix 7-810 is suitable for use with a single pack topcoat such as Selemix 7-610 and 7-611 to give a durable, quality finish.
As the name suggests, Selemix 7-810 Fast Dry Primer dries quickly and is touch dry in 10-15 minutes and can be over-coated after 1 hour (at 20°C), meaning time can be saved on application reducing costs of labour and downtime.
Selemix 7-810 can be used as primer to provide protection on bare steel or phosphate steel, airport ground support equipment, electrical generator cabins and general engineering equipment, light industrial equipment, agricultural and construction equipment such as excavators, earthmovers, screed pumps, dumpers, tractor, harvesters, general engineering equipment, and airport ground support equipment, cars, truck, workshop machines, garage doors, garden furniture plus many more.
Prepare the surface by lightly abrading and thoroughly degreasing the substrate, Selemix 7-810 Fast Dry Primer can then be applied via both airless and conventional spray equipment, for best results 2 coats are recommended.
The Selemix single pack top coats that are recommended for use with Selemix 7-810 are 7-310 Cellulose Topcoat, Selemix 7-610 Fast Dry Synthetic Topcoat, 7-611 Fast Dry Synthetic Matt Topcoat, 7-649 Fast Dry Synthetic Extra Topcoat.
|Stock Colours:||00-A05 & RAL 7004|
|VOC Content:||525-615 g/L|
|Volume Solids:||30-40 %|
|Application Method:||Airmix Spray, Conventional Spray, Electrostatic Spray|
|Theoretical Coverage:||5.9-8 m² per litre at 50µm DFT|
|Wet Film Thickness (WFT):||125-150µm|
|Dry Film Thickness (DFT):||50-60µm|
|Pot Life:||Unlimited hours at 20°C|
|Dust Free:||10-15 minutes at 20°C|
|Touch Dry:||40-60 minutes at 20°C|
|Overcoatable:||Minimum of 1 hour at 20°C|
|Hard Dry:||24 hours at 20°C|
|Cleaner / Thinner:|
|Shelf Life:||See tin for shelf life and storage information|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A single pack paint formulated with nitro-cellulose fast drying top coat designed for the protection of ferrous substrates.
Excellent adhesion and a matt finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.