Coo-Var Zinc Phosphate Primer P201 is a high performance, oil based, modified alkyd primer designed for use on both wood and metal.
Works to provide an anti-corrosive layer in either red oxide or grey on whichever surface it is applied to, and works better than most conventional primers due to its strength and ultra adhering qualities.
Coo-Var Zinc Phosphate Primer P201 is ideal for use on fire escapes, gates and garage doors and works excellently at providing the metal wood aspects of various appliances with the same protective coating.
Coo-Var Zinc Phosphate Primer P201 can be applied using brush, roller or spray and is fast drying product that is touch dry after just 2-4 hours with a theoretical coverage rate of 12-13m2 per litre.
Surface and Environment
Coo-Var Zinc Phosphate Primer P201 can be used on most metal and wood substrates including aluminium and timber and is ideal for use industrial and coastal environments where the need for a versatile product is required.
|Stock Colours:||Red, Grey|
|VOC Content:||430.0g per Litre|
|Suitable Substrates:||For iron and steel|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||13 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||35 - 40 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 12 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.