£7.75 delivery on orders excluding certain products & postcodes *
C2 Environments externally typically are mostly rural areas with atmospheres with a low level of pollution. Internally, C2 environments are unheated buildings where condensation may occur. Examples include depots, warehouses and sports halls.
Scroll to the bottom of this page for a full list of suppliers and their specifications.
Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teamac | Teknos
Guide To Working In Confined Spaces
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.
A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...
An easy to use quick drying gloss finish for overcoating of primed steel substrates.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
A quick drying, tough, flexible paint designed for use on metal surfaces.
A scratch resistant mirror finish, non yellowing gloss boat paint for hulls and decks.
A high performance, modified alkyd metal primer used as an anti-corrosive primer on iron and steel.
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...
A quick drying alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.
A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.
A single pack alkyd high gloss finish suitable as a easily maintained cosmetic finish coat on areas above the waterline.