£7.75 delivery on orders excluding certain products & postcodes *
Teamac Rapidry HB Zinc Phosphate Primer is used as an anti-corrosive primer on iron and steel where rapid coating and finishing is required. Ideal in coastal areas. With exceptional anti-corrosive properties, Teamac's Rapidry High Build Zinc Phosphate Primer is suitable for external iron and steel protection against the elements.
Available in a semi matt finish in red and grey.
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with Teamac Universal Degreaser before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Components: | One Part |
Type: | Solvent Based |
Finish: | Semi Matt |
Stock Colours: | Red and Grey |
Tintable: | No |
VOC Content: | 470.0g per Litre |
Volume Solids: | 45% |
Suitable Substrates: | For iron and steel |
Application Method: | Airless Spray |
Theoretical Coverage: | 10 m2 per litre at 45 microns |
Wet Film Thickness (WFT): | 100 microns |
Dry Film Thickness (DFT): | 45 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 30 minutes at 20°C |
Overcoatable: | After 4 hours at 20°C |
Fully Cured: | - |
Cleaner / Thinner: | Teamac Thinners V/607/16 |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.