Tractor Enamel Rapidry Historic Colour is a rapid drying, high gloss, coach enamel paint. Tractor Enamel Rapidry Historic Colour offers excellent durability with a high protective coating to all metal surfaces. This product is designed specifically for use on Tractors but can be used on all kinds of Metal structures and surfaces.
Tractor Enamel Rapidry Historic Colour is best used as an enamel paint for tractors and other metal substrates that require a durable gloss finish such as trains and machinery. Teamac enamel works well at resisting weathering, heat and oil. It's primary uses are for structural steel and metal fabrications.
Tractor Enamel Rapidry Historic Colour can be applied using spray or brush to produce a high gloss finish. Use spray for larger areas and brush for trickier areas which require more precision. For every litre of Tractor Enamel Rapidry Historic Colour that is used 8-11m2 is covered.
Tractor Enamel Rapidry Historic Colour is a Tractor Enamel designed for a whole range of different surfaces and environments including most woods and metals and is designed to withstand all kinds of different weathers with ultra strong resistance to rain, wind and sunlight.
|Stock Colours:||See colour card|
|Tintable:||Yes, on request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||550.0g per Litre|
|Volume Solids:||41 - 44%|
|Suitable Substrates:||For structural steel and metal fabrications|
|Application Method:||Airless Spray|
|Theoretical Coverage:||11 m2 per litre at 38 microns|
|Wet Film Thickness (WFT):||125 microns|
|Dry Film Thickness (DFT):||50 microns|
|Touch Dry:||1 hours at 20°C|
|Overcoatable:||After 30 minutes - 12 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Coo-Var Thinners 16|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.